TÍNH CHẤT TỪ CỦA CÁC HỆ VẬT LIỆU NANO SPINEL MFe2O4 (M = Fe, Co) TỔNG HỢP BẰNG PHƯƠNG PHÁP ĐỒNG KẾT TỦA
Nội dung chính của bài viết
Tóm tắt
Trong nghiên cứu này, các hạt nano spinel ferrite MFe2O4 (M = Fe, Co) được tổng hợp thành công bằng phương pháp đồng kết tủa đơn giản với tác nhân kết tủa là dung dịch NaOH 5%. Các hạt nano đơn pha spinel FeFe2O4 tạo thành ngay ở nhiệt độ phòng, còn CoFe2O4 thu được sau khi nung tiền chất bột khô ở 800°C trong 1 giờ. Kết quả nghiên cứu bằng kính hiển vi điện tử truyền qua (TEM) cho thấy các hạt nano FeFe2O4 có dạng hình cầu với kích thước hạt 5-10 nm, còn các hạt nano CoFe2O4 có dạng hình khối lập phương với kích thước hạt 20-30 nm. Mẫu vật liệu nano FeFe2O4 tổng hợp được có tính chất của vật liệu siêu thuận từ với độ từ hoá bão hoà rất lớn (Ms = 85,75 emu/g), còn mẫu vật liệu nano CoFe2O4 thể hiện tính chất của vật liệu từ cứng với độ từ dư và lực kháng từ lớn (Mr = 63,58 emu/g; Hc = 1092,17 Oe). Cả hai mẫu vật liệu spinel ferrite MFe2O4 đều bị hút mạnh bởi nam châm đất hiếm.
Từ khóa
đồng kết tủa, FeFe2O4, CoFe2O4, kích thước nano, tính chất từ
Chi tiết bài viết
Tài liệu tham khảo
Dang, T. H., Bui, T. H., Ngo, T. M. T., Nguyen, A. T., Nguyen, V. L., Le, H. P., & Bui, X. V. (2021). Isothermal models of chromium (VI) adsorption by using Fe3O4 nanoparticles. Metallurgical and Materials Engineering, Assosiation of Metaalurgical Engineering of Serbia AMES. https://doi.org/10.30544/489
Duong, H. D., Lam, V. N., Le, M. T., & Tran H. H. (2011). The synthesis of superparamagnetic nanoparticles Fe3O4. Journal of Science, Can Tho University, 54(5), 52-58.
Hoang, B. K., Mittova, V. O., Nguyen, A. T., & Pham, T. H. D. (2022). Structural and magnetic properties of Ho-doped CuFe2O4 nanoparticles prepared by a simple co-precipitation method. Kondensirobannye Sredy Mezhfaznye Granitsy. https://doi.org/10.17308/kcmf.2022.24/9061
Lixia, W., Jianchen, L., Yingqi, W., Lijun, Zh., & Qing, J. (2012). Adsorption capability for Công red on nanocrystalline MFe2O4 (M = Mn, Fe, Co, Ni) spinel ferrites. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2011.10.088
Maaz, K., Mumtaz, A., Hasanain, S. K., & Ceylan, A. (2007). Synthesis and magnetic properties of cobalt ferrite (CoFe2O4) nanoparticles prepared by wet chemical route. Journal of Magnetism and Magnetic Materials. https://doi.org/10.1016/j.j.jmmm.2006.003
Ngo, H. T. P., & Le, T. K. (2018). Polyethylene glycol-assisted sol-gel synthesis of magnetic CoFe2O4 powder as photo-fenton catalysts in the presence of oxalic acid. Journal of Sol-Gel Science and Techonology. https://doi.org/10.1007/s10971-018-4783-y
Nguyen, T. T. L, Nguyen, D. M. K., Nguyen, A. T., & Kwangsoo, No. (2021). The synthesis of zinc ferrite spinel: Determination of pH value in the co-precipitation step. Ceramics International. https://doi.org/10.1016/J.ceramint.2021.10.199
Nguyen, A. T., Truong, C. H., & Bui, X. V. (2021). Synthesis of holmium orthoferrite nanoparticles by the co-precipitation method at high temperature. Metallurgical and Materials Engineering, Assosiation of Metaalurgical Engineering of Serbia AMES. https://doi.org/10.30544/489
Nguyen, A. T., Phan, P. H. N., Mittova, I. Ya., Knurova, M. V., & Mittova, V. O. (2016). The characterization of nanosized ZnFe2O4 material prepared by coprecipitation. Nanosystems: Physics, Chemistry, Mathematics. https://doi.org/10.17586/2220-8054-2016-7-3-459-463
Nguyen, A. T., & Nguyen, T. D. (2016). Synthesis of nanosied magnetic NiFe2O4 material by a co-precipitaion thethod. Science and technology development journal, 19(4), 137-143.
Rachidi, L., Omar, M., Salmani, E., Mohammaed, H., Abdelilah, B., & Hamid, E. Z. (2019). Size effect of the magnetic properties of CoFe2O4 nanoparticles: a monte carlo study. Ceramics International. https://doi.org/10.1016/j.ceramint.2019.12.035
Zi, Z., Sun, Y., Zhu, X., Yang, Z., Dai, J., & Song, W. (2009). Synthesis and magnetic properties of CoFe2O4 ferrite nanoparticles. Journal of Magnetism and Magnetic Materials. https://doi.org/10.1016/j.j.jmmm.2008.11.004